Most of the water leakage happens in the bathroom and kitchen. They both are prone to water, and most homeowners use tiles to keep them free from moisture. However, with frequent use, the gaps between the tiles get exposed, and they provide a passage to water to seepage. This is why it is recommended to make these areas waterproof with the help of a professional waterproofing service. 

How to make the floor waterproof without removing the tiles 

Here are the steps you must follow to make the floor free from water seepage if tiles are already installed. 

• Keep the floor dry till the end of the process 
• Ensure it is clean, dry and free from dust 
• No pipes and taps dripping that could increase the humidity
• Ensure there is no stain of oil, grease and residues on the floor 
• Before going ahead, make the surface rough using 

a tool

• An uneven floor can hold the waterproofing coat 
• Make sure that the floor is properly prepared to go for the next steps 
• Use a poker or a hand cutter to remove the old grouts between the tiles. Removing old gout is the initial step to filling the space with water-sealing chemicals. If there is any cement-based grout, then remove them before applying the coat. 
• After removing the grout, clean them thoroughly 
• Apply the water-sealing coat  
• Let it dry for 30 minutes 
• After drying, repeat the process 
• Now, you can see a physical coat between the tiles 
• The joints will take 24 to 48 hours to dry 
• After it dries, the floor will be hardened; it creates a shield against water seepage. 
• For better results, the coating should be applied with a paint brush 

Once the process is done, it will keep the floor free from water seepage for a longer time. 

How much it requires? 

The cost depends on the area, the type of surface and the quality of the water-sealing coat. However, investing in this waterproofing process will safeguard your property, the health of the family members and the valuable furniture from deterioration. 

Summary 

Waterproofing the tiled surface comes with several advantages. Since you don’t have to remove the tiles, it will save you money and time. So, hire an expert bathroom waterproofing service to get this job done.